Enroll an iPhone on the secure wireless network

Follow the steps below to enroll an iPhone on the secure wireless network. These steps must be performed from the device that you are enrolling!

Please Note These instructions are based on iOS 12.3.1. The steps in this guide may be slightly different depending on the model of phone you have, and the iOS version you are running.


  1. Temporarily connect and sign-in to the BengalOpen16​ wireless network.
  2. Open Safari and visit: https://it.buffalostate.edu/secure-wireless.html
  3. Tap the Enroll Your Device button.
  4. When the Welcome to Buffalo State Secure WiFi screen appears, tap Continue.
  5. Tap Normal Login.
  6. Enter your Buffalo State username and password, tap Continue.
  7. You should see a Profile Downloaded message.

Profile Downloaded pop-up

  1. Return to Settings and tap General > Profile.
  2. Tap DVB_Student or DVB_F&S-NSL.

Tap DVB_Student or DVB_F&S-NSL

  1. Tap Install on the Install Profile screen.

Tap install

  1. Tap Install again at the Unmanaged Root Certificate screen. Tap Install a third time when prompted.

Tap Install again at the Unmanaged Root Certificate screen

  1. Enter your phone’s passcode when prompted.
  2. Tap Install, tap Install again, tap Done.

Your device should now be connected to the Bengal wireless network. If your device doesn't connect automatically, try toggling your wireless off and back on.

0% helpful - 1 review


Article ID: 26368
Sat 3/4/17 1:57 PM
Mon 6/24/19 12:35 PM